To help you understand what takes place between placing an order for custom Printed Circuit Board products and having your boards delivered, we’ve put together this information on the PCB Manufacturing Process we use at Synergy Electronics.
Once you’ve contacted us to order your Printed Circuit Board, our production engineering team analyse the data required to custom manufacture to your specific requirements.
In order to ensure PCB production meets your specifications, we create a job card with your manufacturing data, required at every stage of the PCB fabrication process.
Below is an example of a typical 4-layer multi-layer data required… though Synergy Electronics offer a range of PCB finishes and specifications to adhere to your requirements.
|Production Panel Size||450 x 650mm|
|Production Panel Quantity||32|
|Unit Size||90 x 150mm|
|Panel Size||300 x 200mm|
|Boards Per Panel||4|
|Material||FR4 High TG=170 - S1170|
|Copper Foil||18um Copper|
|Pre-Preg||7628HR RC: 47% 0.21mm|
|Core||1.0mm 35/35um Copper|
|Solder Mask Colour||Blue|
|Component Legend Colour||Yellow|
|Surface Finish||Immersion Gold – ENIG 2-3u”|
|Profiling||Panel route with break tabs|
The data break-down is passed right along the production line to ensure that the operators at each stage of the PCB manufacturing process assume the precise finishes... as PCB fabrication generally involves many small processes.
Standard 4-Layer PCB Production Process
The Printed Circuit Boards are then clarified with deionised water before the final quality assurances takes place. The final products are then packed and dispatched to the requested delivery address.
For further information or enquiries regarding PCB Manufacturing, contact the experts at Synergy Electronics today.